CarGuard - Kniha jízd on Windows Pc

This solution log book is based on the mobile phone / tablet and a unit CAR2BT. A unit communicates with mobile phone via Bluetooth technology. Provides a mobile phone application for vehicle data and is also used to detect the presence of the vehicle and start driving. A unit that reads data from vehicle allows to read the actual mileage and detect fueling, calculates fuel consumption etc via wifi data when connected to wifi automatically stored on the FTP server users or Google Disk ..

The new version adds EcoDrive module, which allows a configuration file to define the fuzzy logic rules economical driving. Part of the installation is a simple set of rules for VW TDI engine. For more information, please contact the manufacturer.

Units must be purchased at the company CANLAB sro The unit supports connection to the vehicle via CAN bus, J1708/J1587 and connect VDO digital tachograph. List of supported vehicles can find detailed documentation for our product FMS OEM CHIP V6. Random is a freight vehicles with protocol SAE J1939/FMS, VW, Skoda, Ford, Nissan, and more.

The application runs completely autonomously and requires no interaction with the driver. Starts automatically after starting the operating system or it can be run manually. After starting the vehicle activates a unit CAR2BT. Application CARGuard Android phone runs as a service, if it detects the presence of a unit starts storing information from the vehicle and internal GPS on the memory card of your phone. One corresponds to ride single file on the card. If necessary, the driver can change the preset or manually enter the event by pressing a button on the phone screen. Event means loading, unloading, columns and the like. These events are stored in a separate file for each day and include the date, time and name of the event.

In the mobile phone / tablet is only necessary to enable Bluetooth. After turning on the ignition and activate the unit communicates with the application unit and stores the data. If the phone gets an available WiFi (at home, the arrival of the company), data is sent to the server, where they are further processed.

GPS is active only when the application is connected to a unit. If the unit is not connected, the GPS data is stored. A person can not be tracked outside of the vehicle. Applications for its operation requires the presence of a unit can not be operated separately.

To evaluate and generate a log book it is possible to use a paid application CarGuard 2.x or version CarGuardLite, which is free. However, it is also possible to implement the evaluation of third-party applications. With details of vehicle data, the application can also be used for teaching economical driving.

v3.0
*odladění EcoDrive modulu a přidání nových možností v nastavení
*přidání podpory čtení Statistik X
*přidání více defaultních příkazů
*doplnění zvukových a textových povelů EcoDrive modulu
*drobné opravy a optimalizace kódu

v2.0.2
*Drobné úpravy
*Zmenšení textu na Data obrazovce

v2.0.1
*Nutno před instalací odstranit z SD karty staré konfigurační soubory.
*Kompletní přestavba všech prvků aplikace.
*Přidání Eco Drive modulu - vyhodnocení ekonomické jízdy.
*Automatická záloha na Drive i FTP.

Allows an app to access precise location.
Allows applications to connect to paired bluetooth devices.
Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.
Allows applications to discover and pair bluetooth devices.
Allows an application to write to external storage.
Allows access to the vibrator.
Allows applications to open network sockets.
Allows applications to access information about networks.
Allows applications to access information about Wi-Fi networks.
Allows an application to receive the ACTION_BOOT_COMPLETED that is broadcast after the system finishes booting.
Allows access to the list of accounts in the Accounts Service.
Required to be able to access the camera device.
Allows an application to read from external storage.