リアルタイム通信監視 on Windows Pc

Display the communication speed in the upper notification bar. Monitoring is possible in real time even while other applications are in use.
If you are concerned about speed when operating the application, you can monitor in real time by pressing down on the notification bar.
In addition, since today's traffic volume and this month's traffic volume are also displayed, please use it for those who use the flat rate communication plan with the upper limit.
※ If you do not work, there is a possibility to resolve by manual setting of lower supplement.

Daily communication logs are saved on the main screen. As we graph the time at which communication is occurring
You can grasp how much communication is occurring in which time zone.
Please use it for grasping communication traffic or packet volume.

The unit of the notification bar is in bytes
1 bps is 1 bit / second. * It changed from version 2.03.
1 KB is 1024 bytes.

The communication graph of the main screen,
Red is uploading, and blue is download.
The summary unit button changes the graph and list.
Depending on the tap in the graph, set the target period to 1 on the left side and +1 on the right side.

WIFI and 3G lines are monitored. Switching is possible by setting button.
The monitoring target of the notification bar is switched by this button.
WIFI in the graph, 3g character tap will switch as well.

In the history of the graph, you can move the month when summing is completed to the SD card.
This makes it possible to reduce the application data area.
In that case, although you can browse as before, it takes time to browse.
This can be restored to the original speed by taking it in the terminal again.
If the SD card icon is displayed in the upper right, it will be loaded from the SD card.

If you are an Android 2.2 or higher, you can graph the amount of traffic per application.
Please press the graph display button of the target application from the list.
The selected time series matches the selected date.

The service is activated in the communication record of this application.
If stopped by task killer etc., measurement may not be performed correctly.
Since it starts up automatically when the terminal is turned on, setting is not necessary especially in normal use.


The communication log saved in the main body has been made possible to output to the SD card.
Also, it is possible to take in additional saved data.

====== 【those who do not operate】 ======
There was a problem that the network could not be monitored properly due to terminal specific problem.
Therefore, for those who can not monitor, we have prepared a mode to detect the currently connected network in the environment setting and set it as the monitoring target.
default is monitoring application standards.
custom detects the network configuration in use and monitors it.

Example)
If 3G can not be detected, set 3G connection on the network, press 3G monitoring setting button in environment setting, custom setting.

Note)
If it can not be customized, it is because the network is not connected or because it is an unknown network. Therefore, after custom setting is not connected yet, custom setting again, since it can not be detected at the time of setting, return to default.

Because of the model (GALAXYS 2 etc) that can not detect the currently connected network, we have made it possible to select a network with communication record from the connection history. Please select what you think is applicable line.
※ If the monitoring is successful, reset monitoring once, please do not change the setting.

v2.15
不具合対応。

v2.13
android 9に対応。アプリ単位の情報取得は、権限設定が必要です。ない場合はアプリ単位の情報なしで、動作します。

v2.10
widgetの追加、IPConnectSearcher連携

v2.08
カウントの不具合修正

v2.07
widgetの追加、集計完了月の削除機能追加

v2.06
10月をSDカードに移動した場合、年表示されない問題を解決

v2.05
アイコンに透過を追加
通知に黒地スタイルの追加

v2.04
画面OFF時の節電対策を実装

v2.03
集計が完了した月の通信ログをSDカードへ移動する機能を追加。
SDカードに退避した情報からもグラフ表示可能なよう機能追加。

通信速度の単位を世間一般的なbpsに変更。
例）1,024Kbps → 1Mbps

Allows an application to write to external storage.
Allows an application to receive the ACTION_BOOT_COMPLETED that is broadcast after the system finishes booting.
Allows read only access to phone state, including the phone number of the device, current cellular network information, the status of any ongoing calls, and a list of any PhoneAccounts registered on the device.
Allows an application to collect component usage statistics
Declaring the permission implies intention to use the API and the user of the device can grant permission through the Settings application.
Allows applications to open network sockets.
Allows applications to access information about networks.
Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.
Allows an application to read from external storage.