Lock screen easily/ Swipe Lock on Windows Pc

You can easily lock the screen by swiping the image that appears when you tap the edge of the screen.
You can prevent accidental operation that occurs before the screen is locked.
Depending on the settings, you can also lock the screen by turn over.


■ Caution
This app uses the device's administrator privileges to lock the screen.

■ How to use

■ Service Start-up
Please turn on the "Device Administrator" and "Lock Service".
After that, there is no need to launch the app.

Tap the edge of the screen to display the image.
Swiping the image will gradually darken the screen, and when it reaches a certain distance, the image will change.
When the swipe is finished with the image changed, the screen is locked.
Or, the screen locks when the screen is turn over.


■ Service Settings
- Sensor Aria Settings -
+ Position
You can specify the position of the detection area from 10 locations.
Multiple positions can be set together.
If you choose to "Turn Over", you can lock the screen when turn over.

+ Length (for swipe action)
Set the length of the sensing area.

+ Height Expansion (for swipe action)
The height of the detection area is doubled.
Please use when touch sensitivity is poor.

+ Show Swipe Line (for swipe action)
Displays the swipe distance line that will be locked.

+ Background Black Out (for swipe action)
Black out the background with swipe.

+ Tap Time (for swipe action)
Set the detection time of lock operation.

+ Swipe Distance (for swipe action)
Set the swipe distance to lock.

+ Light Check (for turn over action)
Set the light check level.

Non: Does not check the light.
Lock the screen when the screen is turned inside out.

Strict: Does not lock until the light reaches zero.
Locks the screen when put on turned over.

Middle: For models that light does not reaches zero.
Select this when not locking at a strict level.
Select this when you do not want to lock in the severe level.
If you operate on face up, you may lock up.

In both cases, the screen locks in about 3 seconds after the lock condition is met.



- Sensor Area Color -
+ Specify the color of the sensing area.
If you are worried about the touch area, it will help you until you get used to the app.



- Swipe Image -
+ Specify the image to swipe.
You can also set your own image.


+ Select "User Image" with "Swipe Image".
+ Save the image you want to display in the following directory.

Unlock Image:
Strage Home/LittleGood/SwipeLock/Unlock

Lock Image:
Strage Home/LittleGood/SwipeLock/Lock

+ Image Type: jpg(jpeg)/bmp/png/gif
*Initially, the sample file (sample.png) a stored.



■ Note
After locking, you cannot unlock the fingerprint / face recognition.
If you want to remove the application, please turn off the "Device Administraror".
Depending on the model, screen touch sensitivity may be poor. Select an area with good sensitivity.
If you have set to prevent automatic startup, the app may not start automatically when the smart device starts.
If you want to automatically start the app, please remove this app from the suppression of automatic start.

When using with Android 6.0 (Marshmallow) or higher, you need permission to "Access to storage device" and "Draw over other apps".



■ Supported OS version
Ver 4.0 or higher

Minor corrections.

Allows an application to receive the ACTION_BOOT_COMPLETED that is broadcast after the system finishes booting.
Allows an app to create windows using the type TYPE_APPLICATION_OVERLAY, shown on top of all other apps.
Allows applications to open network sockets.
Allows applications to access information about networks.
Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.