DAE-aModules on Windows Pc

It is developed to access all the Denkovi Ethernet relay modules, IP controllers and LAN Relay Boards - DAEnetIP2, DAEnetIP3, DAEnetIP4, smartDEN, Wi-Fi Relays. Access relays, lights, fans, water jets or monitor sensors for temperature, humidity, pressure simply with several clicks or widgets. Control your electrical garage door via GPS location coordinates. The app is optimized for phones but may be used with tablets and tvs.

It can be used in fileds like home automation, industrials, sensor monitoring, remote control, data acquisition, robotics and many others.

FEATURES:
>> Access many devices with single application
Access not only one but many Denkovi IP relay boards via single Smart Phone. You can select the model of your device(s) from the drop-down list and add it to the device list. Once the device name, IP, port and password are saved, it is possible easily to control & monitor these devices. DAE-aModules will remember these settings.

>>Control Digital Outputs
These outputs are oftenly used for relays. They can be turned ON or OFF at once or one by one. Refesh the states manually just with one click. You can give a name to each output line and this name will be saved on your smartphone. Additionaly if the particular Denkovi module support this, the names will be synchronized with the hardware device as well.

>>Analog Inputs
Manual or auto refresh of the analog inputs values. Each analog input can be named and scaled to show values in user frienfly units (temperature, humidity, pressure...) which is so called linearization (scaling).

>>Digital Inputs/Counters
Manual or auto refresh of the digital inputs values. Usually these inputs have two possible states - ON and OFF which are shown in the application with different colors. Additionally some modules support counters for the digital inputs which will be also shown on the same screen.

>>Analog Outputs
This tab is for devices which support Analog Outputs (PWM). The sliders can be easily used for dimming lights for instance in your home.

>>Other inputs
Here you can access spceific inputs for temperature, humidity, voltage, current and so on. Some of the devices support such special inputs where the input values are obtained in such units and the DAE-aModules app show them in this tab.

>>Show/Hide I/O
Very often not all the I/O lines are used. The application offers the capability hide unused I/O buttons or showings which can be easily bringed back with several clicks after that.

>>Location Control
With this feature, it is possible to turn on for example your garage door when you approach your home with you car automatically. It uses your GPS coordinates in order to control the relay module and open the door.

>> Timers
Although most of our relay boards support timers, we implemented this feature in this app. Now for every relay (digital) output it is possible to set software timer (pulse).

>> Widgets
Control your electrical devices from home screen widgets without need of entering in the app screens.

DAE-aModules app is suitable for controlling and monitoring all Denkovi IP devices which can be found on this link: http://denkovi.com/ethernet-relays

Minor fix

Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.
Allows applications to access information about networks.
Allows an application to receive the ACTION_BOOT_COMPLETED that is broadcast after the system finishes booting.
Allows applications to open network sockets.
Allows an application to write to external storage.
Allows an application to read from external storage.
Allows an app to access precise location.
Allows an app to access approximate location.