Robot sprzątający RoboJet Air on Windows Pc

RoboJet Air has the following functions and elements:
1) Programming the cleaning
2) wet mops
3) HEPA filter
4) Ultrasonic sensors
5) The virtual wall Utradźwiękowa
6) Remote control
7) 6 different modes of cleaning
     a) Spiral
     b) Mode reflection
     c) along the walls
     d) Zig - Zag
     e) Polygonal
     f) Automatic (combination of modes 1-5)
8) The sensor surface contamination
9) Height sensors
10), sensor full waste container
11) Li-ion 3350mAh
12) The two side brushes
13) docking station to which the robot returns after a finite cycle

RoboJet was awarded prizes in many categories. These are the min .:
- Good Brand, Quality, Trust, Reputation (2016)
- Best value for money (PC World 12/2014)
- Editor's Choice (PC World 12/2012)

6-STAGE SYSTEM CLEANING
RoboJet Air has a 6-stage cleaning system.
1. Two side brushes sweep dirt, garbage and other debris.
2. Main brush dirt will direct the turbine.
3. An efficient brushless motor NIDEC directly draws contaminants into the dust container.
4. The UV lamp disinfect the cleaned surface.
5. Mop with wash water container floor wet.
6. The air purifier purifies the air during the cleaning of impurities and enrich them for light ions, a negative health benefits.

HYBRID CLEANING
Mop with a water container connected to the air allows RoboJet wash the wet area with no need for wetting the mop water.

AIR FILTER
The air purifier further applied to remove RoboJet Air from the air m.in .: dust, pollen, viruses, bacteria, dust mites, mold spores and fungi smoke, smells and harmful fumes.

In addition, air purifier features:
- HEPA filter is an effective carbon filter which is a combination of a HEPA filter and a carbon filter.
- sensor particles PM 2.5.
- ionizer,
- Sensor filter replacement, who will inform you about when you will need to replace the filter.

You can program the timing of filtering the air to be purified with 1, 2, 4 or 8 hours.

BIG CONTAINER DUST SENSOR FULL
Large dust container, which has up to 0.5 liters.
The container also has a special full sensor and thus let you know when I will be full.

ENERGY EFFICIENT
RoboJet Air has a powerful battery (Li-ion batteries 3350 mAh). In turn, after charging RoboJet Air stops charge current, thus saving energy and extending battery life, is once again ready for operation.

brushless motor
The suction turbine RoboJet Air has been used brushless motor, so RoboJet is much less contingency and will serve you longer than other vacuum cleaners.

ONLY 8 CM HEIGHT
Air RoboJet height is only 8 cm. However, after the imposition of the air purifier Air RoboJet the height of the robot will increase only 4.5 cm.

Ultrasonic sensors, DIRT AND DUST CONTAINER FULL
RoboJet Air has sensors:
- Ultrasonic proximity sensors,
- sensor contamination
- Height sensory
- full sensor of the dust container.

CLEANING SCHEDULE
12 programming options gives you time cleaning schedule setting for the day or the whole week with the distinction of hours for a particular day and time cleaning for 10 min, 20 min, 30 min and 120 min ....

VIRTUAL WALL
A virtual wall (attached to RoboJet Air) operates in ultrasonic technology, which define an invisible barrier which does not exceed RoboJet air.

DOCKING STATION
The docking station (included RoboJet Air) is a device by means of which RoboJet Air is charging, and when the battery level drops to 10% of a cleaning robot automatically returns to the station to recharge.

HEPA
H13 HEPA filter traps 99.95% of particles 0.3 microns.

Sterilization with an ultraviolet (UV)
RoboJet Air has a UV lamp, by which disinfect the cleaned surface.

Added 64-bit compliance

Allows applications to change network connectivity state.
Allows applications to change Wi-Fi connectivity state.
Allows applications to access information about networks.
Allows applications to access information about Wi-Fi networks.
Allows applications to open network sockets.
Allows an app to access precise location.
Allows an app to access approximate location.