F3K Master on Windows Pc

F3K Master is a talking Discus Launch Glider competition timer and contest director.

F3K Master has been refined from experience gained creating and using an Android app in actual F3K contests over the last years, both as a timer and a pilot.

Some time ago, while practicing flying my DLG, I got to wondering how I would make a device that detects when you launch the glider and then start a flight timer for you.

I thought about a device in the glider with G-Sensors, proximity sensors, bluetooth and all sorts of complicated electronics.

Then it dawned on me: Android phones have built in g-sensors. What if an Android device could sense the motion of the PILOT, recognize the launch and start the timer for you?

This application is the result of that question.

F3K Master uses g-force sensors in the Android device, allowing the software to detect your launch and start the timer for you. Shake the phone to stop the timer when you land.
You may set the sensitivity or disable motion sensing completely in settings too.

F3K Tasks
Select from the available official F3K tasks, special practice tasks, or configure your own. The timer displays and calls out your flight, window and target times as they change throughout the task. Target time is adjusted where necessary as you progress through the task.

F3K Scoring
Your flights are scored in real time throughout the task according to the task rules.

Touch Screen
In bright sunlight, it can be hard to see the screen to determine where to click, so on the timer tab the whole screen is one large button. Press anywhere on the screen to move the timer through the modes.

Flight Log
A history of your flights are kept for you to look at later.

F3K Master is a Contest Timer
Use the timer with a PA system at the field. Simple as that!

Multi-Player Features:

1) "Enable Multi-Player" in F3K Master settings.
2) Connect all devices to the same local WiFi network.
3) Start a contest on one timer, and the others will sync up to it.

NOTE:
Only the device that started the contest (the "contest director") can pause/stop the contest.
** It can take ten seconds or more for the timers to discover each other at first, so start and then stop a contest. Wait for the other timers to connect and then start the contest again.

Attaching the Android device
Use a "Sports Armband" or Velcro to attach the android device to your non-throwing wrist. It may also be attached to your transmitter with Velcro.

The free version has all the same functions as the paid version with two exceptions - you may only have a single task in the task list unless you are connected to a Multi-Player contest and you cannot set multiple flight groups.

V8.25
- Added privacy statement
- Added data to on field display output
V8.24
- Add new big ladder task
- Add Bluetooth printer support
V8.23
- Fix AULD task crash
V8.22
- Fix for motion sensing
V8.20
- Added ability to change BTOA settings
- Rework of the task list
- Move tasks up or down in the list (long press a task)
- Fixed sporadic Bluetooth communication problems with a BTOA
- Fixed gray screen in latest Android version

Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.
Allows an application to write to external storage.
Allows applications to open network sockets.
Allows applications to access information about networks.
Allows access to the vibrator.
Allows applications to disable the keyguard if it is not secure.
Allows applications to enter Wi-Fi Multicast mode.
Allows applications to access information about Wi-Fi networks.
Allows applications to change Wi-Fi connectivity state.
Allows an app to access precise location.
Allows applications to connect to paired bluetooth devices.
Allows applications to discover and pair bluetooth devices.
Allows an application to record audio.
Allows an application to modify global audio settings.
Allows an application to read from external storage.