ADC-8 USB Analog to Digital on Windows Pc

Monitor the analog output levels of temperature sensors, pressure sensors, humidity sensors, flow rate sensors, energy usage from KWH transducers, electrical KW demand from watt transducers, light levels from phototransistors/photocells, anemometer output, voltage levels, current flow, weight, potentiometer movement, position detection, strain gauges, load cells, or the output from any sensor or device with an analog output.

Android Data Logger - Use this app to turn your phone or tablet into a Data Logger!

• Full technical support provided by on staff advisors
• Monitor up to (8) analog levels from any sensor or device with an analog output
• Control up to 64 relays
• Set up to (8) set points (with deadbands) to control relays based on setpoint
• Continuously log up to 8 channels of analog to a file on your phone or tablet
• Compatible with Android operating systems Android 3.2 through Android 11 (includes Honeycomb, Ice Cream Sandwich, Jelly Bean, KitKat, Lollipop, Marshmallow, Nougat, Oreo, Pie, Q and Red Velvet Cake.)
• May be used with all EECI® USB Analog to Digital converters and Relay Interface products
• Connect directly to your phone or tablet's USB, Micro USB or type C port (most phones will require OTG cable connected to Micro USB or type C charging port)

The ADC-8 USB A to D Relay Controller App is the ideal solution for hundreds of applications where monitoring of analog levels and control of external devices is needed. Connect any of EECI's USB Analog to Digital converters to the USB port on your phone or tablet and monitor the analog output levels from any sensor or device with an analog output. Relays may be used to control HVAC equipment, motors, flow rates, demand usage, appliances, indicator panels, heaters, robotics, alarms and thousands of other electrical devices.

This App allows you to energize or de-energize a relay and monitor analog levels from your tablet or phone's touch screen. The App's start-up screen allows you to control 8 relays. Touch the relay button for the desired relay and the relay will energize (button will turn red when relay energizes). Touch the button again and the relay will de-energize (button will turn green when relay de-energizes). Label the relay buttons as needed from within the App or just create a text file. App storage is turned off by default but may be turned on under App Permissions. Storage may be left off and is only needed to save the app settings.

Control up to 64 relays when relay expansion cards are added to any of EECI's Analog to Digital converters. The additional relays are controlled by selecting the desired screen (8 relays per screen).

The App also allows you enter setpoints to control the corresponding relays for the purpose of temperature control, to set pressures, flow rates, motor speed, etc.

The ADC-8 USB A to D Relay Controller App has been developed to run on Android operating systems Android 3.2 up to 11 which includes Honeycomb, Ice Cream Sandwich, Jelly Bean, KitKat, Lollipop, Marshmallow, Nougat, Oreo, Pie, Q and Red Velvet Cake. Root permission or special driver not needed for most Android phones and tablets that use the Android operating system 3.2 or higher (Honeycomb and up), just enable USB Host Mode*. This app utilizes the most recent USB interface technology developed by Prolific Technology, Inc., a leader in USB interfacing. *not needed with newer systems

Free telephone support is provided for this app by contacting EECI® Support at (937) 349-6000. Custom Apps available for specialized applications, contact EECI's support staff for more info or visit our website: www.eeci.com

Need to receive a text when an alarm or event occurs? Ask about the free EECI® Event Notification App.

©Copyright 2018-2022 Electronic Energy Control, Inc.
EECI® is a registered trademark of Electronic Energy Control, Inc.

2021 Android 10 update, better screen compatibility

Allows an application to write to external storage.
Allows an application to read from external storage.