Modern DIY Wood Planter Bench on Windows Pc

Add some sophistication to your garden or patio with this modern planter bench.

Materials Needed:

   (4) 2”x10”x12’ treated pine
   (1) 2”x10”x8’ treated pine
   (5) 2”x4”x12’ treated pine
   (1) 2”x4”x8’ treated pine
   (6) 5/4”x6”x8’ treated pine
   (100) 2-1/2” wood screws
   (50) 2” wood screws
   exterior stain clear and/or colored
   measuring tape

   carpenter’s square
   pencil
   circular saw or table saw
   clamps
   drill
   level
   soil
   plants
   pea gravel

Build the Frame Pieces

From one of the 2”x4”x12’ boards, cut 8 pieces that are 11-1/2 inches long. Cut the other four 2”x4”x12’ boards to 11’9". Lay two of the 2”x10”x12’ boards on a flat surface side by side. Place two of the 2”x4”x11’9” boards at the top and bottom of the 2”x10”x12’ boards, 1-1/2” from both ends. Place four of the 2”x4”x11-1/2” boards between the two long 2”x4” boards, spaced evenly with the two at the ends flush with the ends of the long 2”x4” boards.


Assemble the Frame Pieces

Stand the two long sides up with the 2”x4” boards facing each other. On one end stack two of the 2”x10”x1’9” boards between the long sides. Clamp the entire end of the bench together. Use 2-1/2” wood screws to attach the end pieces to the 2”x4” pieces of the long sides. Add one of the 2”x4”x1’6” pieces to the top and bottom of the short 2”x10”x1’9” end. Repeat for the opposite end.


Preparing the Planter

Position the planter where it will stay. Use a level to make sure the planter is level from end-to-end and from side-to-side. Note: The planter will be quite heavy. This will require more than one person to move.
Stain the planter according to the manufacturer’s directions and allow for the appropriate drying time before proceeding.


Build the Bench

Cut the 5/4”x6”x8” boards in half (usually about 48-1/4”). From each of these boards, cut to 47-1/2” removing the factory edge. Measure in 3 feet from one end of the planter. Make a vertical line with a level starting at the top and stopping about 3 inches from the bottom.  Attach the first 47-1/2” board with 2” screws against the surface of the planter with the long edge flush with the top of the planter and the short edge flush with the level line. Tip: Use a clamp to make sure the board stays flush while attaching. Add two more 47-1/2” boards under the first one, lining up the edges.

So simple right ? we share this tutorials to make your garden, unique,cheerful, elegant and make garden more beautiful .

Want to know more ? want to try make it ?

Download this application now and get what you want here. worth to try and you will like it.
simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.

Once you've mastered any one of these new Modern DIY Wood Planter Bench, find a Modern DIY Wood Planter Bench and put your skills to the test!
Feature List:
✓ Amazing 300+ Modern DIY Wood Planter Bench with step by step.
✓ You can share all tutorial to social media and other
✓ Zoom in, zoom out for all tutorial.
✓ Application works offline. No need to download content.

Allows applications to open network sockets.
Allows applications to access information about Wi-Fi networks.
Allows applications to access information about networks.
Allows an application to read from external storage.
Allows an application to write to external storage.
Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.