Homy for Domoticz, Home Assistant, ESP8266, MQTT on Windows Pc

Homy allows you to control your home automation server Jeedom, Domoticz, Home Assistant even when you are not at home *. Homy is also compatible with the CPL home automation modules from the manufacturer Wattlet.
Homy also collects data and drives Arduino, ESP8266, ESP32-based connected objects using MQTT messages.

With Homy, you keep control over all your private data. No home automation control transits via a tier ** server. Homy supports HTTPS and WSS protocols (Websocket secured by SSL certificate). By activating the HTTPS or WSS protocol, all the commands and all the data (states of your home automation accessories, sensor measurements ...) are exchanged with Homy in a secure and encrypted way. This is also the case with the IP CCTV camera images connected to Home Assistant.

(*) requires a 3G or 4G internet connection. Also requires to use an online MQTT server or configure the router to expose your home automation server to the internet
(**) unless you are using an online MQTT broker such as cloudMQTT

► Main functions of Homy
✓ Automatic categorization
✓ Accessory management by: places without limitation (house, apartment), rooms, favorites, categories

► Domoticz Compatibility:
✓ Supported protocols: MQTT, HTTP, HTTPS
✓ Automatic classification (or manual) of home automation accessories
✓ Automatic detection of the data type
✓ Lamps and switches (light / switch)
✓ Selector with several positions (selector)
✓ Bulbs with RGBW, RGBWWZ, RBGWZ partially supported
✓ Push buttons
✓ Light switch
✓ Dimmer
✓ Sensors: generic, rain, weight or scale, humidity of foliage, door closing contactor or window or connected lock, doorbell, sunshine (lux), UV (uv), meters, electric power and gas reading, electric current, dew point, soil moisture, solar radiation, noise pollution, distance, temperature, humidity, barometer, water flow, wind speed and direction, air quality (CO2), motion detector, smoke detector
✓ Actuators: Alert with level and send message, siren, motorized shutters (all or rie, adjustable opening level, venetian blind, inverted control), text display, thermostat setpoint
✓ Perform a scene
✓ Customized unit

► Home Assistant Compatibility:
✓ switch: switches and connected sockets
✓ binary_sensor: sensors with binary state (presence, movement, opening ...)
✓ sensor: sensors with a measured physical quantity (temperature, humidity, atmospheric pressure ...)
✓ air_quality: air quality with different pollutants (CO2, CO, NO2, SO2, AIQ ...)
✓ fan: fans and air purifier
✓ light: RGB connected bulbs
✓ vacuum: robot vacuum cleaner
✓ water_heater: water heater
✓ climate: connected thermostats
✓ cover: curtains and shutters
✓ lock: connected locks

► Jeedom Compatibility:
   ✓ Automatic addition / modification of parts and accessories
   ✓ Automatic classification of accessories
   ✓ Activate / deactivate / start a scenario from Homy with permission request
   ✓ Color selector
   ✓ Hide the labels of commands that have an icon
   ✓ Auto-fill connection parameters by reading the QRCode (official Mobile plugin required)
   ✓ Uses custom Jeedom icons

► Wattlet CPL Compatibility:
✓ Push, Push2, Pushl
✓ Light / Light2 (double output)
✓ Power
✓ Window: shutter opening control
✓ VMC
✓ Pilot: Pilot wire heating control. All modes are supported: comfort, comfort + 1 ° C, comfort + 2 ° C, frost free, eco, stop

► Tasmota MQTT compatibility
    ✓ Automatic order detection
    ✓ Change state of the outputs (all supported Sonoff modules)

► MQTT compatibility
    ✓ Allows you to control your connected objects developed with Arduino, ESP8266, ESP32, Python code

New Connectors: Home Assistant, Wattlet Wattcube
Improvements:
* Best return state of accessories Jeedom, Domoticz
* Request for confirmation before executing an action

Allows applications to open network sockets.
Allows an app to use fingerprint hardware.
Allows applications to access information about networks.
Allows an application to write to external storage.
Required to be able to access the camera device.
Allows an application to receive the ACTION_BOOT_COMPLETED that is broadcast after the system finishes booting.
This constant was deprecated in API level 21. No longer enforced.
Allows an application to read from external storage.