通話時間タイマー(アラーム)：通話時間を振動でお知らせ(長電話防止のサポートアプリ) on Windows Pc

It is a tool to activate when making a call (incoming call) and informing of time over by the vibrator
Setting is unnecessary, if you make a call as usual, or if you receive a call, the application automatically starts up and ends at the same time as the end. By default, notification is made in 4 minutes (vibes).

! ! Please be sure to confirm it! !
This application may not operate depending on the model and OS. Since we can not assume any responsibility, please use after confirming that it will operate within a fixed amount when using for the monitoring of flat rate calls.

■ Features
〇 Easy operation with minimized setting
It automatically starts up during a call, and ends automatically when the call ends. You can use it without being conscious of the application
○ Design not to disconnect on incoming call (only for some models)
We will only monitor outgoing calls from you. There is no way to cut off the telephone we received
〇 Consideration for toll-free and free calls within family (only for some models)
You can make settings so that calls are not turned off for destinations that do not generate communication charges
〇 Small menu not to disturb the call
When monitoring, a small state is displayed on the upper left of the screen. Even when you want to erase the display you can easily minimize it
〇 Energy saving design not resident
It starts up on outgoing calls and ends with a conversation. The influence of the battery is kept to the minimum by only staying on the phone during the call.
○ Implement automatic termination (for some models only)
We set up automatic termination after a certain period of time has elapsed. Since it is a function that requires special attention when using it, the function is suppressed in the initial setting. It is an implementation as an additional function in case of using.
· This is a very high possibility of not working with new models and latest OS.
· The ability to suddenly become unavailable due to updating of the smartphone etc. is a very high function. For that reason, it may not be automatic termination unexpectedly.
· Can you use automatic terminate function by pressing "release check" button in setting screen? The function will be available after you check it. I am asking for troublesome procedures because I want you to be strongly aware of restrictions.
· In any case, the author will not compensate for physical / mental damage due to the financial cost of call charges, disconnection of conversation contents, etc.
· The authors can not present improvement measures even when the automatic close call function stops working. It will guide you only to the end of using the automatic close-out function.
Regardless of the automatic termination function I am sorry to say that it is tough, but please forgive us kindly.

■ Notes
○ Even if the user suffers a disadvantage in using this application, the developer can not assume any responsibility.
○ The elapsed time of this application is an estimate only, it is not something that guarantees a fixed amount of time.
○ Depending on the version of Android, it may not function properly.
○ There is a possibility that it can not be used due to future Android updates or customer's model change.
○ There is a case to end the publication of the application without prior notice.
○ There is a possibility that it does not function in the call function provided with the application such as SNS or the call provided by non-carrier.
○ There are things that have large background communication on some models, please try the following if you are concerned Please inquire that you can deter communication.
----
1: Tap "Settings" → "Use data" on Android
2: Since the applications that made data communication so far are displayed in the application usage status of the application, tap the application you want to restrict (stop) the background data communication
3: Since details of the data use of the application are displayed, the "Restrict application background data" at the bottom is turned on
* Operating procedures may be different depending on the OS.
-

■ Background of creation
We've been offering an automatic end-talk application for some time, but due to changes in Google's terms in September 2018, we have completed updating in consideration of the influence of existing users.
This application will be a new long phone call protection application recreated according to the terms of Google. The details of the opening of the previous application will be as follows.
https://drive.google.com/open?id=1gl4VqIicusA3xEmtpzUGile97QG9Fvnl


About usage authority
This application uses the following authority to implement functions and improve user's convenience.
· Fixed SD card contents
It is used as the save destination of the application setting value
· Fixed SD card contents
It is used as the save destination of the application setting value
· Read contacts
In order to simplify the entry of the list outside the watch list, we make it quote from the phone book. It will never send out externally
· Call number
We are using it to call the automatic close-call function
· Read terminal information and ID
We use it to detect the call state
· Vibration control
We use it to vibrate at notice
· Full access to the network
· Display network connection
We are using it at the time of releasing the automatic close-out function or for free version of advertisement display
· Turn off the device's sleep
We are making it possible to continue monitoring even if you fall into sleep during a call
· Whether to ignore battery optimization
We are making it possible to continue monitoring even if you fall into sleep during a call

----
LINE and LINE logo are trademarks of LINE CORPORATION.
TWITTER, TWEET (tweet), RETWEET (retweet), the Twitter logo are registered trademarks of Twitter, Inc. or its affiliates.
LINE and the Twitter logo are installed based on their respective guidelines, but due to specification changes or suggestions from the customers, there is no guidance and display may be canceled.

新規作成
自動終話アプリを提供しておりましたが、Googleの規約変更に伴い更新を終了いたしました。
本アプリはGoogleの新規約に沿って再作成した長電話の防止アプリとなります。
規約に対応する為に制約も多いため、既存のユーザ様には機能が不足していると思われる方もいらっしゃると思いますが、よりシンプルに作り直しました。
満足には遠く及ばないと思いますが、引き続きご愛顧頂ければ幸いです。
どうぞよろしくお願いいたします。
※なお、前アプリの終了の経緯は以下に記載しております。
https://drive.google.com/open?id=1gl4VqIicusA3xEmtpzUGile97QG9Fvnl

Allows an app to create windows using the type TYPE_APPLICATION_OVERLAY, shown on top of all other apps.
Allows access to the vibrator.
Allows an application to initiate a phone call without going through the Dialer user interface for the user to confirm the call.
Allows read only access to phone state, including the phone number of the device, current cellular network information, the status of any ongoing calls, and a list of any PhoneAccounts registered on the device.
Allows applications to open network sockets.
Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.
Allows an application to read the user's contacts data.
Allows an application to write to external storage.
Permission an application must hold in order to use ACTION_REQUEST_IGNORE_BATTERY_OPTIMIZATIONS.
Allows applications to access information about networks.
Allows an application to read from external storage.