ABB-free@home® Next on Windows Pc

Note: This app only works with a ABB-free@home® Smart Home System with an installed firmware version 2.5.0 or higher.
-----------------------------------------------------------------------------------

It enables the programming and operation of your free@home system. Whether blinds, lights, heating, air conditioning, scenes, time programs, Philips Hue or Sonos devices: All functions of your free@home system can be controlled via this app.

With the myBuildings remote access, you can connect the app to your free@home system via the Internet and conveniently control your house from anywhere in the world or simply call up the "house status".



New functions of the Next app:
---------------------------------------------------------------------

The ABB-free@home® Next app offers 4 different pages to control all aspects of your free@home system. The pages can be accessed via the lower control bar:


HOME

This page offers a quick overview of what's going on in your home:

- The "Status" tiles show you how many lights are on, how many shutters are open, whether windows are open and whether the alarm system is switched on. A short tab on a tile can e.g. the light can be turned off directly.
- The "Weather" window tile shows you the weather data of your free@home weather station.
- The "Next switching times" window tile shows the two functions that are to be switched next using an automated time program. The event can be suspended once using the slider. A tab on the switching times overview shows all switching events for the next 24 hours.
- The "favoritesFavorites" are a collection of individually selected functions. The selection is made by setting the "star" symbol. The function can be carried out directly via a tab on the small blue symbol in the top right corner of the favorites tile. The function in full screen view is called up via a tab on the main area of the tile, which offers even more setting options.

The order of the functional areas can be changed using the bubble at the bottom of the home page.




EQUIPMENT

Here you can access all devices of your free@home installation. Optionally sorted by trades or by installation location (the switch is made using the symbol at the top right of the page).

Trades
All devices are displayed sorted according to their device class (light, blinds, temperature, others).

Installation location
All devices are displayed according to the configured installation location.


AUTOMATION

All of the automated processes you have created, such as timers, scenes and actions, are listed here.

Timer
Existing time programs can be activated / deactivated.

Scenes
Scenes can be started with a tab on the blue symbol. The scene is called up in full screen view via a tab on the main area of the tile.

Actions
Actions can be activated / deactivated and edited. In combination with a myBuildings remote access, geofencing actions can be created,
with which actions can be triggered based on entering or leaving a previously configured location. The data is sent directly to the connected System Access Point via the end-to-end encrypted channel and can therefore not be evaluated by Busch-Jaeger.



…MORE

Notification center
All system messages are saved here.

WIDGET
With the widget you can always see the current switching status of your favorites, even if they are operated via another app or directly via a switch. Of course, you can also switch favorites directly using the widget.

MyBuildings
Here you can connect your free@home system and your smart phone to the myBuildings portal.

GEO LOCATION
Launch actions based on your current location. Switch e.g. E.g. turn on the lights when you get home.

Minimum Requirements: The app only works with a free@home system installed in your home (from firmware version 2.5.0). The free@home system must be integrated into your home network. A WIFI network is needed to access the system via your mobile devices and the app.

Fixes a problem when creating scenes in Room Control mode

Allows an app to access approximate location.
Allows an app to access precise location.
Allows applications to access information about networks.
Allows applications to connect to paired bluetooth devices.
Allows applications to discover and pair bluetooth devices.
Allows applications to open network sockets.
Allows an app to create windows using the type TYPE_APPLICATION_OVERLAY, shown on top of all other apps.
Allows an application to write to external storage.
Allows applications to perform I/O operations over NFC.
Allows an application to receive the ACTION_BOOT_COMPLETED that is broadcast after the system finishes booting.
Allows an app to use fingerprint hardware.
Allows applications to access information about Wi-Fi networks.
Required to be able to access the camera device.
Allows access to the vibrator.
Allows an application to record audio.
Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.
Allows applications to enter Wi-Fi Multicast mode.
Allows an application to modify global audio settings.
Allows a calling application which manages it own calls through the self-managed ConnectionService APIs.
Allows an application to read from external storage.