pratik RADYATÖR hesabı on Windows Pc

Practical radiator account for all who does not require technical knowledge

In order to provide comfortable heating, engineering calculations are made in the selection of installation elements, and the healthiest result is achieved. For this, it is necessary to obtain a lot of information from the architectural project to the smallest building detail, and prepare the heat loss calculation sheet for each location in heat loss calculations and reach the healthiest result.

However, this calculation method is not possible for buildings that have been built in our country and do not have enough data. For this reason, you can calculate the approximate heat loss of the building with minimum data entry by 3 different methods and select one of these calculated losses and select the radiator. If you encounter very different results in 3 different calculation methods, you can continue with the average heat loss, which is their arithmetic average.

You have 4 different options in radiator selection.
1. Panel radiator;
It is the most used radiator type in the market, especially in residential buildings. It is preferred because of its ease of assembly, high efficiency and rapid heat. In the calculation made, how many meters of radiators you need is calculated according to the area area.
2. Cast iron radiator;
It is not a reason for preference in residences due to late heating. It is generally used in business centers, schools, hospitals, etc. It is preferred in areas with crowded people.
3. Towel / Banyop that;
It is generally used in bathrooms or places where decorative radiators are preferred. You can choose according to the enxboy size according to the heat loss calculation.
4. Aluminum radiator;
It is not preferred due to its high costs. However, if you want to achieve a much higher efficiency in a very short time, it may be the reason for preference. Since it warms up much faster, you can convert the fuel you use to efficiency in a much shorter time.

After all the selections are made, the quantity report is prepared. You can save this screen to the radiator album in your phone's gallery by pressing the save button with the 2 buttons on the bottom left, and you can send the result screen to many friends via social media or different ways by pressing the share button.

Hourly yields of radiator types and types are defined in kcal / h in the settings menu. You can change the efficiency values ​​of the brand you have used in the settings menu and save them. You can use it continuously in your next calculations.


Practical radiator calculation application was prepared by using approximate values ​​over average criteria. The results obtained are those that do not have precise accuracy and should be seen as advisory.


Practical radiator calculation-1
It is the calculation process made according to the site area considering the building condition. Standard coefficients are used, which are determined by the direction of the building and the condition of the floor.

Practical radiator calculation-2
The heat loss calculation by region is calculated using the coefficient of the region where the city or district you are located in.

Practical radiator calculation 3
The heat loss calculation according to the external temperature is calculated using the coefficient determined according to the annual average external temperature of the province or district. It is the recommended method that you can get much healthier results compared to the previous 2 methods.

Since these 3 different calculation methods will give very different results, the 4th option can be used as the result of the average heat loss calculated as a result of the arithmetic average of these 3 methods.

yeni uygulama

Allows applications to open network sockets.
Allows applications to enter Wi-Fi Multicast mode.
Allows an application to write to external storage.
Allows applications to access information about networks.
Allows using PowerManager WakeLocks to keep processor from sleeping or screen from dimming.
Allows an application to read from external storage.