電氣單線圖計算(Beta)-檢討盤體NFB及配管線徑 [ Free 部分功能限制 ] on Windows Pc

Electric circuit line diagram calculation-Electric circuit line diagram
[Free partial function restrictions]

Google_Play: (Official version)
https://play.google.com/store/apps/details?id=appinventor.ai_sogonetcom.Tools_power_PRO_V2_0708_5_9

====== Update from the official version (the Beta version does not correspond to the update)
The official version: V1.001.12 announced for 2020-02-11 [User electrical equipment installation rules] updated and revised
, Corresponding corrections to the ampere value of various cables.
====== (Beta version update record)
V1.001.9 Corrected the wire insulation temperature to 90 degrees, and the correction coefficient during the period of 40 degrees of weekly temperature was changed from 0.96 to 0.95
V1.001.8 revises the single-phase 220V load distribution in the 3-phase 220V system voltage.
V1.001.7 takes 60 degrees at the wire insulation temperature,
When PEX cable is used for wiring, when PVC pipe is used for piping, the ampere value of the wire will refer to the PVC wire
[Insulation temperature 60 degrees] Ampere value review of the configuration;
In addition, when the PEX cable is used for the wiring, the ampere value of the wire will refer to the PEX line when the metal tube is used for the piping
[Insulation temperature 60 degrees] Ampere value review of the configuration.

Provide the entire disk load for the disk circuit of different voltages
(Including lamp, plug, electric heating, motor, TR..., etc.) Review the calculation and review of the circuit switch, main switch, and pipeline diameter.

1. Select the type of load, wire insulation temperature, ambient temperature, and pipeline materials.. etc.
The calculation is suitable for NFB, distribution pipeline diameter and 3% pressure drop maximum configuration length.
2. Carry out the overall calculation, provide the main switch, copper bus specifications and the insulation temperature of different wires (60℃, 90℃)
The diameter of the trunk line distribution pipeline.
3. Provide suggestions for the longest distance of each load circuit under the condition of 3% pressure drop.
(Disc and TR are not provided, because the main line may be formed by multiple discs (TR), so the 2% pressure drop is not reviewed for a certain section of the main line)
4. The remarks also provide the diameter of the distribution line when connecting the household wire or the secondary transformer.
5. Provide a review of the merger of the sub-markets back to the upper main market.
6. The load meter of the one-line diagram can be transferred out, which can be converted into EXCEL file.
7. For when the total NFB>200A, the system also provides segmented NFB to accommodate all loop loads ≦30A.

Congratulations, you found it!
Mechanical and electrical (hydropower) engineering tools.
Such a tool can satisfy your query and calculate the NFB (number of poles-AT/AF) of the circuit load of various disks and the practical small tool suitable for the pipe diameter.

If you have any questions or suggestions, please contact line.token@gmail.com

V1.001.9 更正導線絕緣溫90度，周溫40度時期修正係數由0.96改為0.95。
V1.001.8 修正3相220V系統電壓中單相220V之負載分配。
V1.001.7 在導線絕緣物溫度採60度，
配線採PEX電纜時，配管選用PVC管時其導線安培值將參照PVC線
[絕緣物溫度60度] 配設之安培值檢討；
另配線採PEX電纜時，配管選用金屬管時其導線安培值將參照PEX線
[絕緣物溫度60度] 配設之安培值檢討。

Allows applications to open network sockets.
Allows applications to access information about networks.
Allows applications to access information about Wi-Fi networks.
Allows an application to read from external storage.
Allows an application to write to external storage.