給水配管徑計算-Water pipe diameter calculate on Windows Pc

給水配管徑計算-Water pipe diameter calculate

(提醒您:
因大陸部分品牌手機常刪改Google原始程式碼,恐影響APP之執行，請先安裝(Beta版)測試無誤後再行購置正式版本)
https://play.google.com/store/apps/details?id=appinventor.ai_sogonetcom.Tools_Water_pipe_test_V1_200324_1

(因APP需較多文字說明,
建議於[設定] 將[字型大小]或[顯示大小]改為預設或縮小，以利畫面文字顯示)



實例演練:https://youtu.be/-lMXSTU19B0

一般工程監造、施工人員大多無給水設計專業，在現場往往無法判別手上施工圖(或設計圖)所標示之配管徑是否正確合理?

施工過程一定會遇上業主變更，當業主增改設備數量、規格時現場應調整為何種管徑才能搭配設置?往往無法即時斷定。

現今 [給水配管徑計算-Water pipe diameter calculate] 能夠提供最簡單之操作介面，利用點選設備別、數量來計算出應配設之給水幹管徑。讓未具備設計專業之人員亦能容易計算對應。使得現場施工不延誤，能即時對應。

[給水配管徑計算-Water pipe diameter calculate]:
1.採用 [給水均等管徑] 搭配 [設備同時使用百分比] 來計算，提供建議使用者應配設之管徑。
2.使用者點選畫面上之設備，並加、減修正數量後，點選功能鍵 [納入]
即可併入紀錄(將顯示於畫面下方)。
3.若發生設備誤點選、數量輸入錯誤..等Bug，使用者僅需點選該項目(會以反黃標示)，
再利用點選 [剔除] 功能鍵將該項從記錄中移除。
4.本系統能即時加總統計 [總均等管徑值] 並顯示於最下方(可將螢幕往上拉伸來查詢)。
5.螢幕上方HELP鍵按下可拉出輔助說明，包含:
a.範例說明--讓使用者能容易了解如何操作。
b.(附表一)設備同時使用百分比
c.(附表二)給水管徑均等表
d.關於--本APP操作說明
6.若要作累計不同樓層之幹管計算，則可利用螢幕上方 [例外規格輸入] 將
下一層累計之 [總均等管徑值] 輸入，併入當層計算，即可得垂直幹
管應設之管徑。
7.若系統所提供可點選之設備不足符合使用時，可先查出需求設備
之給水管徑值，再利用HELP查[ (附表二)給水管徑均等表]，將其轉
換對應13A 管徑之對應均等管徑值後，利用 [例外規格輸入] ；即可
將其納入計算。

恭喜，你找到了！
機電(水電)工程工具。
這樣一款工具，能滿足你查詢計算各種給水設備之配管徑的實用小工具。
- 不到 4MB裝機空間，是個實用工具，超省空間。

有任何問題或者建議，請郵件聯繫line.token@gmail.com

---------------------------------------------

Generally, most engineering supervision engineers or construction workers do not have a professional water supply design. Therefore, it is usually impossible to judge whether the pipe diameter shown on the site construction drawing (or design drawing) is correct or reasonable?

The owner will definitely encounter changes during the construction process. When the owner increases or decreases the number and size of the equipment, which pipe diameters should be adjusted according to the settings? Usually not immediately determined.

[Water Pipe Diameter Calculation] Now provides the simplest operation interface. Use the choice of equipment type and quantity to calculate the pipe diameter to be set. Make it easy for people without design expertise to calculate correspondences. Apply immediately and react immediately.

1. Calculate with [equipment simultaneous use percentage] and [water supply main diameter] and provide the user with the recommended pipe diameter.

2. After the user clicks the device on the screen and modifies the quantity using addition or subtraction, then clicks the function key [納入](include).
You can merge it into a record (it will appear at the bottom of the screen).

3. If there is a problem with the equipment item, such as incorrect selection or incorrect quantity entered, the user simply clicks on the item at the bottom of the screen (it will be marked yellow).
Then click the [剔除](Remove) function key to delete the item from the record.

4. The system can calculate the [total value of total pipe diameter] at any time and display it at the bottom (you can stretch the screen for query).

5. Press the "Help" button at the top of the screen to pull out auxiliary instructions, including:
a. Explain examples-make it easy for users to understand how to do it.
b. (Annex Table 1) Percentage of equipment used simultaneously.
c. (Annex Table 2) Equivalent water supply pipe diameter table.
d. About the instruction manual of this APP.

6. If you want to calculate the total number of supervisors on different floors, you can use [Exception Description Entry].
Enter the [Total Equal Diameter] accumulated in the next layer and integrate it into the current layer calculation to get vertical bars.
The pipe diameter should be set.

7. If the equipment provided by the system is not enough to meet the requirements, you can find the required equipment first Water pipe diameter value, and then check it with the help of [[Supplementary Table 2] Water pipe diameter average table] After changing the equivalent pipe diameter value corresponding to the 13A pipe diameter, use [Exception Specification Input]; to
Included in the calculation.

V1.001.9 修正對Android Q(SDK 29)的執行。