REMOTE KONTROL on Windows Pc

This app uses the Device Administrator permission. This permission is necessary to allow a user to remotely lock their phone.

INSTUCTIONS:
Once downloaded, install the application to your phone. Click on the application icon and the password window will appear. The initial password is blank, so just tapping EXECUTE will open the application control panel. The application will run in the background. Once installed, the user just taps the application icon to pull up the password window, enter the correct password, and the control panel will appear.

APPLICATION CONTROL PANEL:
The control panel is used to set certain variable necessary to remotely control your phone.

TRIGGER NUMBER – This is the ‘backup’ number used to send the text messages to the device with application installed. The phone will only perform these functions by receiving a text containing certain keywords from the TRIGGER NUMBER.

PRIORITY NUMBER – This is a number that the user enters to let that number’s user know his or her phone is lost and to contact them at a different number. For example, an employee needs to relay some important information to her boss. She entered her boss’s number as the PRIORITY NUMBER when she installed the application. A week later she left her phone in her hotel room and her boss needs to immediately reach her. A text message is sent from the TRIGGER PHONE number with the keyword “CALLFWD” and her phone will send a message to her boss, indicating he should contact her at the CALL FORWARDING NUMBER.

CALL FORWARDING NUMBER – This is a number that the user enters as an alternative contact number. This is the number that will be sent to the PRIORITY NUMBER. Please see the example scenario outlined in the PRIORITY NUMBER description.
RESET DEFAULT PASSWORD – The initial password is blank upon installation. Users can create a new password in this field.

***IMPORTANT***
- The TRIGGER NUMBER, PRIORITY NUMBER, and CALL FORWARDING NUMBER must be entered in the control panel prior to the phone being lost or stolen.

- All phone numbers entered in the control panel MUST have the following format: +1(area code) phone number. For example. +13152551358. The ‘+’ sign must be included as a prefix.

- Text messages MUST be sent from only the TRIGGER NUMBER and only contain the keywords in order to execute the desired tasks.

- The keywords MUST be the only text in the body of the text message and MUST be in all caps.

REMOTE KONTROL Functions

Below is a list of the functions that can be executed remotely by the phone receiving a text from the TRIGGER NUMBER containing the keywords below:

“FLASH’’ = Sounds Alert for 5 seconds, takes front facing picture and saves it to the SD card, send text with LAT, LONG

“BATTERY” = Returns Battery level

“BATTERY SAVER” = Turns on Power Saving mode

“BATTERY NORMAL” = Turns off Power Saving mode

“ALARM LEVELS” = Returns Ringer, Notification, and Alarm volume levels

“RINGER MAX” = Sets Ringer to maximum volume

“RINGER VIBRATE” = Sets Ringer to vibrate

“LOCK PHONE” = Locks phone screen

“SEND TRIGGERS” = Returns text message containing all the text message triggers on their functions

“ALARM MAX” = Sets Alarmto maximum volume

“ALARM MIN” = Sets Alarm to minimum volume

“GPS STATUS” = Returns the phone’s current GPS status

“INQUIRE GPS” = Returns the phone’s location coordinates and location altitude

“ALERT” = Phone will play a high pitched sound for 5 seconds and turn on the torch for 10 seconds

“NOTIFICATION MAX” = Phone will play a high pitched sound for 5 seconds and turn on the torch for 10 seconds

“KONTROL VARS” = Returns the value of the TRIGGER NUMBER, PRIORITY NUMBER, and the CALL FORWARDING number

“ALERT” = Phone will play a high pitched sound for 5 seconds and turn on the torch for 10 seconds

“CALLFWD” = Sends a text message to the PRIORITY NUMBER (entered in the Control Panel) to send all calls to the CALL FORWARDING NUMBER (entered in the Control Panel)

Initial Release